Sometimes a situation comes that we have to delete certain specific website address (url) only from the web-browser location or address bar say to preserve your identity. For example, you visited a certain website and don’t want your friends or others to know that you visited that site, then you have two methods to delete the website links either delete all the urls from the address bar or only the specific one(recommended).

In Firefox, you just need to move your mouse over the website entry and press Shift + Delete Key combination to delete the desired address from the history.

For Internet Explorer, follow the steps exactly as described bellow; do keep in mind this trick needs editing the registry and you need to be very careful with it:

1. Close any open Internet Explorer window
2. Go to Start->Run and type in regedit.exe and press enter to launch the registry editor
3. Navigate to the following key: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\TypedURLs
4. Delete the desired URL

If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

How people tells that it is not there problem, if you’re in team then being a team member you should contribute every possible way help you can. If you don’t, then no one is going to give a damn care about you.

Read the story carefully and learn how they are chop up for not being helpful to each other.

Reaching out of or team.

One day, a little mouse living on a farm, spied the farmer and his wife opening a package. He was aghast to discover that the package contained no food, but a mouse trap. The mouse ran to the farmyard warning everyone.

“There is a mouse trap in the house, there is a mouse trap in the house!”

The chicken raised his head and exclaimed, “Mr.Mouse, I can tell you this trap is a grave concern to you, but it has no consequence to me and I cannot be bothered with it.”

The mouse turned to the pig… “I am so very sorry Mr. Mouse, but the trap is no concern of mine either. The mouse then turned to the bull… “Sound like you have a problem Mr. Mouse, but not one concerns to me.”

The mouse returned to the house, dejected that no one would help him or was concerned about his dilemma. He knew he had to face the trap on his own.

That night the sound of trap catching its prey was heard throughout the house. The farmer’s wife rushed to see what was caught. In the darkness she couldn’t see that it was a venomous snake whose tail the trap had caught. The snake bit the farmer’s wife.

The wife caught a bad fever and the farmer knew the best way to treat a fever was with chicken soup. He took his hatchet to the farmyard to get the soup’s main ingredient.

The wife got sicker, and friends visited her round the clock. The farmer had to feed them so he butchered the pig.

The farmer’s wife got worse and died. So many friends and family came to her funeral that the farmer had to slaughter the bull to feed them all.

So the next time we hear that one of our team-mates is facing a problem and think it doesn’t concern or affect us, let us remember this:

When anyone of our Team Members is in trouble, WE ARE ALL AT RISK!

So next time, if your family, relatives, and friends and near ones are in trouble and if you think, you can be their help then don’t look back, go ahead and give your every efforts to wipe off the trouble.

In short I would like to say that

Blogosphere is also a kind of rat trap, we should be helpful to each other when required.

So how was the story? What you think about it? Please comment.

Update:- This post was earlier pictured but I have edited it because the image was making loading speed of blog slow.

Few days back, we have been preparing many projects, practicals and seminars for our semester examination of engineering. We had to deal with lots of PDF files (text/image) in the Internet, copying text/image from the PDF to word document was the most difficult tasks we faced. Converting word to PDF was easy because many software allows that but vice versa was not that easy because lot of tools were their but not for free, they all are expensive.

After lot of hours of searching I found free software through which we converted the PDF file to word document successfully within few minutes and friends it was such an easy step to follow. Although for this conversion you will have to be online.

Convert your PDF file to a Word document

1. Go to Zamzar.com
2. Click “Browse” in Step 1 and choose the PDF file you wanted to convert to .doc (you can repeat this step several times to add multiple files)
3. Step 2 will automatically set to doc format, but you can choose to convert your PDF to other file types such as TXT, XML, RTF and many more from the drop-down menu.
4. Enter your email address in the corresponding box in the Step 3
5. Click convert! The file will be uploaded to Zamzar and very soon you’ll get an email with a link to download the converted file(s)

This is a wonderful tool for those who frequently convert PDF to word. I have tried conversion of many complex PDF including text/image to word document without any difficulties. So friends, if you ever wanted to convert PDF to Word documents freely then Zamzar comes to your rescue. So try it out. If not today, it may be great help in the near future. Thumbs up to the Zamzar guys for the excellent service.

Alternate converter PDF to Word document

As I have mentioned earlier, Zamzar is a very good tool for conversion of PDF to Word documents but you have to been online for that. Everyone can’t be online all time. What if you want to convert PDF to Word document offline then you can head over to the hellopdf.com, download the free software, install it and start you conversion work.

As I told earlier, my engineering paper will start from 28th May-16th June, So I won’t be much involve in blogging for at least few days but I am sure you guys will keep visiting and commenting on this blog. Any of you can opt for a guest blogger on this blog if you are interested. If you do; you get a free backlink, free visitors to your blog and free ebook Worth $$$. For more information please visit my earlier posts Guest Blogger Wanted.

So I hope you enjoy your stay and come back again. Please do comment!

Today I am going to tell you how to create a normal table but through different method in Microsoft Word. I am sure if you use this method to create table in front of your friends, colleagues or anyone, they’ll surely think that you’re a tech-freak and most probably a hacker.

So let’s see how we create this table differently:-

You can create this table without the touch of mouse and Menu. Isn’t it strange!!!

Type the content “+–+–+–+” in Microsoft Word and press Enter without the quotes. One row of a table and three columns will be created and for more rows you can press TAB.

How this works:-

Step 1: When you have typed this

+—+—+—+—+

and

Step 2: After pressing Enter having the cursor at the last ‘+’ , results in creating a table with a single row

Step 3: Press TAB to create more rows

Step 4: Here ‘+’ represents the column borders and ‘-’ represents the length of the each column

So how is the trick? Hope you enjoyed it

All the bloggers struggle for the traffic to their blog or websites. We’ll use the term blog here instead of website. This traffic can be of various forms. You can get them through search engines, referrals or direct and other methods. Above all search engine traffic which is called natural traffic is the best source of getting high visitors to your blog.

Search engines work on different algorithms to analyze the contents and keywords, and present the search results. Google, for instance, assigns page ranks to the blogs and blogs that rank highly will appear early in the results. Of course, many other factors are considered by search engines, such as relevance, unique content, coding and quality of links. The major search engines know that revealing these factors will only encourage manipulation of the ranking system and have thus been secretive about how the ranking algorithms work.

No any SEO consultant can exactly tell you how each search engine views your blog; the common concept is that the more visible your blog is on the internet, the higher your ranking will eventually be. Having your blog linked to by many other blogs and indexed by different search engines increase its exposure and visibility.

Many big webmaster or bloggers are in success today because they get a lot of natural traffic through search engines to their blogs. This traffic doesn’t come overnight. It takes many months or years to get those as your pages takes time to appears in the front page or say top 10 pages which results in higher traffic. So if you start working on submitting your blogs to this search engines and working on increasing page ranks from now onwards then you’ll get a fruitful result in the near future.

The most popular search engines of now are Google, Yahoo and MSN. Getting your blog listed in these are very important. One of the fastest ways to have your blog indexed is to get another blog that is already in the search engine listings to link to you. When the search engine crawlers visit that blog, they will find your blog and index it. Try this method if you do not want to wait for search engines to approve your blog submission.

There are some search engines which charge a fee for submission but I’ll talk here only about free submissions of blogs to search engines. The three major search engines which offers free submissions are Google, Yahoo and MSN. Free submission could result in much lower traffic, a low rank and longer period of time before your blog actually shows up in the results returned by the search engines at starting. My blog is only 1 and 1/2 months old and it is indexed in all the three major search engines.

In this article, I shall provide a list of search engines where you can submit your Blog URLs for Free and have your Blog indexed by the search engines.

Check out these Important points before you submit your blog to search engines:-

1. To check if your blog has been indexed by a search engine, enter the full blog URL into their search query. If you see your blog appearing in the search results, it has been indexed and there is no need to resubmit the blog.
2. When submitting your blog, you do not need to submit the URL of each individual web page. Submit only the top-level web pages and for Blogger Blogs, it will be an address like this http://blogname.com or http://blogname.blogspot.com without the www. before the blogname.
3. Some of the sites send advertisements and newsletters to you in exchange for free submission. If you don’t want that, remember to opt out of it. Avoid having your regular email account filled with these mail by creating another free web-based email account just for website submissions.
4. Since search engines have different standards of content, design and technical specifications, submission of your site does not guarantee that it will be included in their database.

Top three search engines (Recommended)

1. Submitting to Google
2. Submit to Yahoo
3. Submit to Microsoft Live Search

Other Search engines are (Your wish whether to submit or not as it doesn’t matter much)

1. Alexa
2. BeamedSearch
3. dinosearch
4. exalead
5. whatUseek
6. Anoox
7. Searchsight
8. Exactseek
9. Scrubtheweb
10. BestYellow
11. Mixcat
12. SearchWarp
13. jayde
14. infotiger

Hi friends, I’m getting crazy. A lot of examinations are waiting to kill me. See I’m still blogging, damn exam I don’t care it. Opps mistypo.

Yeah its true, my final examination of semester VI of engineering as well as examination of semester II of GNIIT are very near just a week left, it starts from may 28 till june 30. So I won’t be able to posts frequently. Anyway I’ll make sure that I posts 1 posts per week.

Sorry dear friends. But I can’t help it. Please do understand. But If you want to do a guest post or write on this blog, you’re most welcome. I really need a guest blogger to keep the blog alive. So this posts is all about Guest Blogger Wanted.

You can contact me if you’re interested or drop a comment. The content can be anything that fits into the categories in the sidebar as Blogging, Computer tips and tricks, wordpress and Youtube.

Mail your:-

1. Name
2. email id
3. blog/website url and
4. your interest

Advantages:-

1. In every posts you do, Your blog url will be inserted i.e., you’ll get a free link back to your blog which can help to gain your page rank. Also there’ll be publicity because if someones accepts the guest posts then I’ll do the publicity part! that’s guaranteed. You’re traffic will increase to some extend.
2. I won’t pay you but You’ll get a free ebooks from me. You’ll get the Adsense Empire after 15 days of guest blogging and more later. click the image to know more about the ebook.

So friends! am counting on you

Update:-

1. The guest blogger name will be listed in the sidebar.
2. The guest blogger shouldn’t post the content which is already posted on their blog.
3. How the guest blogger will posts???—– The guest blogger will send the content to me and I’ll posts on behave of him/her. All the credits will be given to the guest blogger.

This is awesome; I couldn’t wait to posts this weird movie on my blog. Did you ever thought of watching a Star Wars movie on Dos Command prompt, I bet you never thought because it seems impossible, who thought on CUI interface, we can also watch a movie, but some cool guys made this trick. I think the creator devoted a lot of time to make this work. Actually it is based on ASCII code. Well I’ll not be able to explain its working. If you guys know then please share your information through comment.

Note: - This movie doesn’t have sound and color but the subtitles are great. You should at least have a try. See the sample in below images shown.

Follow these simple steps to watch Star Wars movie on Dos Command Prompt and huh don’t forget to grab your seat: -

1. Click on Start Menu.
2. Now click on Run.
3. Type “telnet towel.blinkenlights.nl” (without quotes).
4. Click on ok or press enter.

That’s it. Now enjoy the show!!!

Sometimes we have to leave the important work on computer in hurry for a while and of course leaving computer open without locking or shutting down is at great risks, if someone mess up with our current working data or any project then we’ll be at great losts. Yeah almost all computer users are afraid of this scenario but now there is no need to fear as we can lock our computer just by double clicking the shortcut icon on the desktop to quickly lock the keyboard and display without using Ctrl + Alt + Del or screensaver.

Here’s the simple steps to create a shortcut on your desktop to lock your computer:-

1. Right click on the desktop.
2. Point to New and select Shortcut.
3. You will then see a Popup Window(Create Shortcut Wizard).
4. In ‘Type the location of the item’, key in ‘rundll32.exe user32.dll LockWorkStation‘.
5. Click ‘Next’ and you will be prompt to name the Shortcut. Give it any name you want and click ‘Finish’.

You can also change the shorctut’s icon, follow this simple steps.

1. Right click the shortcut and then select Properties.
2. Click the Shortcut tab, and the click the Change Icon button.
3. In the Look for icons in this file text box, type: shell32.dll
4. Click ok.
5. Select one of the icons from the list and then click ok

You could also give it a shortcut keystroke such Ctrl + Alt + L. This would save you only one keystroke from the normal command, but it could be more convenient.

Here’s the simple step’s to add a shortcut keystroke:-

1. Right click the shortcut and then select Properties.
2. Click on the Shortcut tab.
3. In the Shortcut Key text box, type any key and Windows XP will convert it to a shortcut, usually in combination with the Ctrl + Alt keys.

To lock your keyboard and display, double click the shortcut or use the Shortcut keys

Also there is another great and simple way to lock your computer. Any compatible keyboard that includes the Windows logo key and the Application key can also lock your computer. To use this trick.

Press the Windows logo key + L.

If you Enjoyed this posts then you might be interested to read this wonderful shortcuts.

1. Shortcut keys to shutdown and restart your computer
2. Shortcut key to place a computer in suspend mode

So try this method, it takes only a few seconds if you’re interested?

Note:- I have tried and tested this tricks on windows XP only. Any other OS users may try and share your experience here.

Do you maintain a diary, it may be personal of any day to day related activities, if you do and is bit online savvy then you can try this cool hidden feature of Notepad. Amazingly Notepad act as a simple digital diary for us.

Here’s the simple steps to use the Windows Notepad as a simple digital diary.

1. Open the Notepad and type .LOG and press enter.
2. Save the file with any name of your choice and close it.
3. Now open the file again in Notepad. Surprisingly the current date and time is inserted automatically after the .LOG line. Now you can write you daily dairy entry here.

Each time you open the file, Notepad repeat the process, appending the time and date to the end of the file and placing the cursor below it.

Cool isn’t. This way one can make Notepad as a simple digital diary. Are you going to try?

Note:- By using F5, we can also bring current date and time but it lacks the automatic insertion of date and time.

We already know that there is a cd eject option on the cd drive but the question is if we had cd eject option then why is the cd insert option not included? Thats a typical questions why windows didn’t included in its package. But you guys know that we can play around with the windows and “Adding Insert Option to CD Drive Context Menu” manually is not that tough.

Being lazy to press physically the insert button of the cd drive, we have some registry codes which will do work for us. We just need to click the newly created insert button of the cd drive. So guys try this tricks and fool your friends that your windows already have this insert option or whatever you like.

Here is the step-by-step procedure to Add Insert Option to CD Drive Context Menu:-

1. You will need to download dll file of cdeject. So download from the link cdeject.zip and extract it and copy the DLL file to the %windir%\system32 folder.

2. Copy the following code into Notepad:

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\CLSID\{02A07E80-EFA2-11D4-8306-A7EBD4C50C7C}]
@=”CDEject Context Menu Shell Extension”

[HKEY_CLASSES_ROOT\CLSID\{02A07E80-EFA2-11D4-8306-A7EBD4C50C7C}\ InprocServer32]
@=”C:\\WINDOWS\\system32\\cdeject.dll”
“ThreadingModel”=”Apartment”

[HKEY_CLASSES_ROOT\Drive\Shellex\ContextMenuHandlers\ {02a07e80-efa2-11d4-a7ebd4c50c7c}]
@=”{02a07e80-efa2-11d4-8306-a7ebd4c50c7c}”

3. Save the file with any name, but the extension must be .reg

4. Run the file, it’ll ask for permission. Grant it.

5. You’ll now get the insert option in the CD drive context Menu.

Before following the above procedure i.e., Add insert option to cd drive context menu.

After following the above procedure i.e., add insert option to cd drive context menu.

So how is the trick!!! did you tried?